How To Install Drip Edge Without Removing Shingles

The strip of metal flashing that runs under the roof along the eaves of your house is called eave strip or drip edge. Eave strips help support the roofing that extends past the roof decking and keeps rainwater from running down the fascia board.

On many homes the drip edge eave strip is made of galvanized metal, which doesn't hold paint well and can rust over time. A improve alternative is vinyl coated aluminum eave strip, which won't rust and don't demand to be painted.

The baste edge is often replaced when new shingles are installed, but information technology can be replaced at any fourth dimension. Cobblestone roof shingles tin can go brittle in cold weather, and then wait until a warm (but not hot) twenty-four hour period to remove and replace eave stripping.

Tools and Materials Needed:

• Ladder
• Apartment pry bar
• Hammer
• Tin snips
• Eave stripping
• Galvanized roofing nails

Removing Drip Edge Eave Strips:

1. Gently lift up the shingles along the lower edge of the roof, and find the nails attaching the eave strip to the roof decking.
2. Use a flat pry bar and hammer to remove the nails property the eave strip to the roof decking.
3. Skid the eave strip out from nether the shingles.

Replacing Baste Edge Eave Strips:

1. Install the eave strips on the lower roof edges kickoff, with the eave strips under the shingles and felt underlayment.
2. Marshal one finish of the lower eave strip even with the border of the roof decking.
3. Lift upwards roof shingles, and boom the eave strip in place with galvanized roofing nails.
4. Overlap the other pieces of eave strip by at least one" and nail them in identify.
5. Cutting the last slice on the lower eave affluent with the roof decking on the other end.
6. Install the gable eave strips over the felt underlayment and on meridian of the lower eave strips.
7. Cutting and bend the cease of the gable eave strip to cover the gap between information technology and the lower eave strip.
8. Overlap higher gable eave strips over the lower ones past at least 1".
9. At the ridge run i gable eave strip fifty-fifty with the roof peak.
10. Cut and bend the superlative end of the matching gable eave strip so it extends over the roof peak past at least 1″ and overlaps the matching gable eave strip.
11. Miter the end of the gable peak eave strip so it's plumb.

Watch this video to detect out more.

Further Information

• How to Repair Leaking Chimney Flashing (video)
• Leak-Proof Flashing: Fixing Leaks Around Chimneys (article)
• How to Replace a Damaged Asphalt Roof Shingle (video)
• How to Replace a Roof Vent Jack (video)

VIDEO TRANSCRIPT
Danny Lipford: Everybody knows how important your roof is to protect your dwelling house from the atmospheric condition, but you might not realize how important this little metal strip is to your overall roof organisation. Information technology's called eave strip or eave metal.

Now, many homes volition take eave stripping made from galvanized metal, which is designed to keep information technology from rusting. Simply without proper maintenance, information technology can get very cruddy with all the rust spots that tin form.

At present, one alternative is to replace it with this type of metal, which is a vinyl coated aluminum which won't rust. And information technology won't demand any type of painting, just a fiddling scrap of cleaning from time to time. At present, generally it's replaced at the same fourth dimension your shingles are replaced, only really it's fairly piece of cake to replace information technology anytime.

The shingles along the lower edge of the roof are gently lifted upward, and then as not to harm them, and and then a apartment pry bar is used to remove the nails holding the eave strip to the decking. The new stripping is slipped in over the roofing felt, just nether the shingles. Finally, the catchy office is nailing downwardly the new strip while holding up the shingles.

It's fairly labor intensive to change out eave stripping on a dwelling simply nowhere near as much work as sanding, priming, and painting rusty metal.

Source: https://todayshomeowner.com/video/how-to-replace-metal-drip-edge-eave-strips/

Share this post